Becker Centronic UnitControl UC520, Руководство по сборке и эксплуатации

Страница: 36 / 76

Information for venetian blind operation
In venetian blind operation, the venetian blind runs in touch
mode to facilitate precise positioning of the slats. If you
press a travel button for longer than 1 second, the venetian
blind runs in maintained operation mode.
If an intermediate position II (tilt position) has been pro-
grammed, the blind will automatically travel to this position
by double-tapping DOWN in the limit position (once the run-
ning time has elapsed). If an intermediate position I has also
been programmed, the blind is tilted as soon as intermediate
position I is reached.
Cleaning
Only clean the device with a suitable cloth. Do not use aggressive cleaning
agents that may damage the surface.
Technical data
Rated voltage 230 V AC / 50 Hz
Switching current
5 A / 250 V AC at cos =1
Degree of protection IP 20
Class of protection
(dependent on correct assembly)
II
Permissible ambient temperature 0°C to +55°C
Type of mounting Flush mounted Ø 58 mm, wall moun-
ted/surface mounted in appropriate
surface mounted housing
Radio frequency 868.3 MHz
36 - en