Becker Centronic / B-Tronic EasyControl EC715, Руководство по сборке и эксплуатации

Страница: 51 / 144

Commissioning of B-Tronic
Explanation of symbols
Up/retract button
STOP button
Down/extend button
Programming button (on the transmitter )
Master button (on transmitter )
0
9
8
7 6 5 4
3
2
1
Function switch (on transmitter
0
98
7 6 5 4 3
21
)
Receiver confirms once or multiple times by
“clicking” or “shifting”
KNX RF S-Mode
When used as KNX RF S-Mode device, the function switch must be perman-
ently set to position 6. If this is turned to a different position, the device will no
longer work as programmed. As soon as the function switch is turned back to
position 6, the function as programmed will once again be available.
Normal/master mode
The transmitter can be operated in two modes:
•
Normal mode (normal operation) The commands that are issued apply
to all the receivers of a channel.
•
Master mode (Setting mode for all B‑Tronic products). The commands
issued apply exclusively to one selected receiver of a channel.
The normal mode is set at the factory.
51 - en