Becker active.5s EU Скачать руководство пользователя

Страница: 44 / 157

>>>

NAVIGATION MODE

Personal destinations

Using the

Personal destinations

button

you can call up Google

™

points of

interest that have been imported into the
Navigation device and start route
guidance to one.
• See "Selecting a destination from

Personal destinations" on page 44.

Contacts

Using the

Contacts

button you can call

up Microsoft

Outlook

contacts that

have been imported into the Navigation
device and start route guidance to the
address listed in the contact.

• See "Selecting a destination from

Contacts" on page 45.

Selecting a destination from Personal
destinations

You can call up Google

™

points of inter-

est that have been imported into the
Navigation device and start route guid-
ance to one.

In the main menu, press the button

destinations

Press the

Personal destinations

button.

Remove
protection

The protection is re-
moved from the desti-
nation. This function is
only available for pro-
tected destinations.

Move up

The destination is
moved forwards by one
position. If the destina-
tion is moved it is auto-
matically protected.

Move down

The destination is
moved back by one po-
sition. If the destination
is moved it is automati-
cally protected.

Delete entry

The destination is delet-
ed from the fast access
mode.

Delete all
entries

All destinations (except
for the protected desti-
nations and your home
address) are deleted
from the list.

Option

Meaning

Note:

To display custom Google

™

points of

interest, the Google

™

KML files must

be stored in the

Navigator\content\us-

erdata\mydest

directory of the Naviga-

tion device.

Содержание active.5s EU






























































































































































Результаты поиска

Содержание active.5s EU

Отзывы:

Похожие инструкции для active.5s EU

Бренды по названию

Популярные бренды

Becker active.5s EU, Руководство по эксплуатации

Результаты поиска

Содержание active.5s EU

Отзывы:

Похожие инструкции для active.5s EU

Бренды по названию

Популярные бренды