Becken BDH4758, Инструкция по эксплуатации

Страница: 27 / 128

27
EN
Dehumidifier | Deshumidificador | Desumidificador
3 4
Up/Down buttons
• Humidity Set Control
The humidity level can be set within a range of 35 % RH (Relative Humidity) to 85
% RH (Relative Humidity) in 5 % increments.
For drier air, press the button and set to a lower percent value (%).
For damper air, press the button and set a higher percent value (%)
•
TIMER Set Control
Use the Up/Down buttons to set the Auto start and Auto stop time from 0.0 to 24.
5
Fan Control the fan speed. Press to select fan speed in three steps: low, medium
and high. The fan speed indicator light illuminates under different fan speed
settings. When selecting the High fan speed, both the Low and Med fan speed
lights illuminate
.
6
Timer Press to initiate the Auto start and Auto stop feature, together with the
and buttons
.
7
Wireless (optional) Press this button for 3 seconds to start the Wireless
connection mode. The LED DISPLAY will show ‘AP’ (at this time the unit shuts
off all other functions) to indicate you can set the Wireless connection. If the
connection (router) is successful within 8 minutes, the unit will exit Wireless
connection mode automatically, the Wireless indicator illuminates and the unit
resumes the previous functions. If the connection fails within 8 minutes, the unit
exits the Wireless connection mode automatically
.
8
Display Shows the set % humidity level from 35 % to 85 % or auto start/stop time
(0~24) while setting, then shows the actual ( ±5 % accuracy) room % humidity
level in a range of 30 % RH (Relative Humidity) to 90 % RH (Relative Humidity).
Error Codes and Protection Codes:
AS - Humidity sensor module error - Unplug the unit and plug it back
in. If the error persists, call for service
ES - Temperature sensor error - Unplug the unit and plug it back in. If
the error persists, call for service
P2 - Collector is full or collector is not in the correct position – Empty
the collector and place it in the correct position.