April, 2017, V 1.1
5
Installation Guide E700M & E800A Workstations
CONNECTING THE FILTER/REGULATOR
Step 4
: When facing the Spray Gun Cleaner
look on the left side of the cabinet. Here you
will find the Air Inlet. This is where you install
the Regulator/Water Separator and hook up
the shop air. Follow the instructions included
in the Parts Kit.
Note
: This regulator should be set up to
110psi. We have a second regulator inside
the Control Box to protect the pumps
(Factory set at 85-90psi)
HOW TO INSTALL A GROUND WIRE
–
For
OPTIONAL HEAT PKG SYSTEMS ONLY
Step 7
: Locate the ground wire on the rear of
the unit and cut the tie-rap.
Note
: The Spray Gun Cleaner must be
grounded to your grounding system.
