-5-
2. Installation
This chapter describes the function of the VDSL2 switch components and
shows how to install it on the desktop or shelf. Basic knowledge of networking
is assumed. Read this chapter completely before continuing.
2.1. Product Description Overview
The product support VDSL2,
supports 802.1Q VLAN, QoS, 802.1d / 1w/ 1s
Spanning Tree Protocol, 802.1x, Port Security, Port Mirroring, IGMP Snooping,
SNTP, Storm Control, Rate Control, SNMP and RMON, Link Aggregation
(IEEE 802.3ad)
etc. features.
2.2. Switch Front and Rear Panel
The front panel of 8-Port VDSL2 + 2 Gigabit Combo VDSL2 30a CO Switch
has 8 VDSL2 ports at the left, 2 Gigabit SFP slots and two 2 Gigabit copper
ports at the right. The product name is at the top on the left. Figure 2.2.2a
shows a front panel of this switch.
The rear panel has a power connector, and figure 2.2.2b shows a rear panel of
the switch.
Table 2.2.2c shows the port function of the switch.
Figure 2.2.2a Front Panel
Figure 2.2.2b Rear Panel
Table 2.2.2c Port Function
Port
Function
VDSL2
Connect to VDSL2 interface.
RJ45
These 2 RJ-45 ports connect to network devices such as PCs,
print servers and other network peripherals at 1000 Mbps.
SFP
These 2 mini GBIC ports allows you to insert a SFP module for
1000Mbps fiber connection
Console
This is where you will connect RS232 console cable.
Power
This is where you will connect the AC power adapter.
