manualshive.com logo in svg

BeBionic bebionic3, Техническая информация

Поделиться
Скачать
BeBionic bebionic3 Скачать руководство пользователя страница 60

60

INDUSTRY CANADA STATEMENTS

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is 
subject to the following two conditions: (1) this device may not cause interference, and (2) 
this device must accept any interference, including interference that may cause undesired 
operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using an 
antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry 
Canada. To reduce potential radio interference to other users, the antenna type and its 
gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not 
more than that necessary for successful communication.

This radio transmitter (IC:10634A-RSLRFBB) has been approved by Industry Canada 
to operate with the antenna types listed below with the maximum permissible gain and 
required antenna impedance for each antenna type indicated. Antenna types not included 
in this list, having a gain greater than the maximum gain indicated for that type, are strictly 
prohibited for use with this device.

Name / Model 

Gain

Impedance

7488910245/Wurth

1,0

50 Ohm

OEM Responsibilities 

The AMB2520-RSL Module has been certified for integration into products only by OEM 
integrators under the following conditions: 

1. 

The antenna(s) must be installed such that a minimum separation distance of 20cm 

is maintained between the radiator (antenna) and all persons at all times.
2. 

The transmitter module must not be co-located or operating in conjunction with any 

other antenna or transmitter. 

As long as the two conditions above are met, further transmitter testing will not be 
required. However, the OEM integrator is still responsible for testing their end-product for 
any additional compliance requirements required with this module installed (for example, 
digital device emissions, PC peripheral requirements, etc.).

Содержание bebionic3





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды