BeBionic bebionic3, Техническая информация

Страница: 40 / 68

40
5.3 Start up
On opening the application the main screen shown
above will appear. Any greyed out options are currently
not operational. The area highlighted in red identifes the
bebalance version number.
On the bottom left of the entry screen you can select
your preferred language: English, Spanish, French,
German or Portuguese.
5.4 Language Selection
5.5 Radio Frequency (RF) Module Configuration
bebalance now has an auto-detect feature for the
dongle. You are advised to insert the RF dongle into a
USB port of the computer before starting the application
so it can be detected on start-up.
However, if you forget, just insert the dongle and return
to the entry screen menu or go to the configuration
screen and click on
Radio .
When the RF Dongle has been found the message box
will show ‘RF Dongle Found’ highlighted in green. If not
found the message box will show ‘No RF Dongle’
Enabling RF Module on the bebionic v2 or bebionic3
Hand
With the hand switched ON, press and hold the program
switch on the back of the hand for approximately three
seconds until the RF dongle begins to flash continually.
Note : This function differs from the glove donning mode.
To enable the RF dongle the hand must be switched
ON, whereas in glove donning mode the hand must
be switched OFF. The RF dongle can be disabled by
pressing for more than two seconds. Alternatively, you
can disconnect the power to the hand by using the
battery switch.