ASSEMBLY / OPERATING INSTRUCTIONS
To convert to Cot Bed Mode continued...
16
17
19
18
20
Carefully stand the Cot bed upright.
Secure the Mattress Retainer Panel at each end with
2 x 52mm bolts fitted through the metal cam placed
in the routed section of the Mattress Retainer Panel
Screw to the End Panels.
Set up cam and 52mm bolt for use.
Position in place on Mattress Retainer Panel.
Tighten the 2 x Mattress Base bolts on the Cot Bed
End Panel.
Replace the 3 x 85mm bolts through the Plinth and
into the Mattress Retainer Panel.
16a.
17a.
19a.
19b.
18a.
18b.
20a.
The Cot bed is now ready for use.
PLEASE NOTE!
Check all bolts for firmness, but do not over-tighten bolts.
PLEASE NOTE!
Use extra 2 x Filler Bolts supplied in the top exposed holes to
avoid any possible finger entrapment.
