ASSEMBLY / OPERATING INSTRUCTIONS
To convert to Cot Bed Mode continued...
6
7
8
9
10
Separate and remove the End Panel.
Mount the Cot Bed Panel to the Plinth dowels
and refit the 3 x Plinth bolts.
Replace the 2 x Mattress Base bolts in the Cot Bed
Panel but do not tighten.
Slide the Mattress Retainer Panel onto the
wooden dowels of the Side Panel Plinth,
making sure the routed openings are facing
inwards.
Remove the Mattress Base bolts on the end to
be converted.
Remove 3 x End Panel Plinth bolts from the
bottom of the Plinth.
6a.
6b.
7a.
8a.
9a.
10a.
