09
Tether strap
Ensure tether strap is used at all times. Make sure your hand is fed
through the loop as shown in the diagram.
Folding the stroller
1. Before folding the stroller, remove bootcover, close the hood,
place seat in full layback position and transfer handle to forward
facing mode.
2. Simultaneously squeeze both handle levers located in the middle
of the stroller handle and lift the red lever located on the left side
of the stroller handle.
3. Push down on handle to commence folding the unit. Once fold is
complete, push down on the handle to engage the folding locks.
Assembly Instructions
Attaching bumper bar
1. Align the bumper bar ends with the locking buttons on the sides
of armrest moulds of the stroller frame and push inwards until they
“click” and lock into position on each side.
2. To remove bumper bar; push both locking buttons in and pull
bumper bar out.
