10
Assembly Instructions
Cleaning
To ensure the long-lasting use of your stroller, dry it with a soft absorbent cloth after use in rainy
weather. Use a damp cloth to clean the frame. Do not use abrasive cleaners. After using your
stroller on the beach, clean the frame and wheels thoroughly with water to remove the sand and
salt. Allow it to dry thoroughly. Removable and non-removable fabric covers and trims may be
cleaned using a damp cloth with soap or mild detergent. Allow it dry completely before folding
or storing it away. Do not dry clean, or use bleach on fabrics or trims. Do not machine wash,
tumble or spin dry, unless the care labelling on the product permits these methods.
Maintenance
Check stroller regularly to ensure that locking devices and components are secure and working
properly. Always check parts regularly for tightness of screws, nuts and other fasteners – tighten
or replace if required. To maintain the safety of your stroller, seek prompt repairs for bent, torn,
worn or broken parts. Use only those parts and accessories approved by CNP Brands. If the
wheels squeak, use silicone based spray or light oil ensuring it penetrates the wheel and axle
assembly. To prevent mould or mildew, do not fold or store the product if it is damp or wet. Allow
it to dry thoroughly. Always store the product in a well ventilated area and away from direct
sunlight.
If you have any difficulties in assembling the stroller, please contact our Service Department.
In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse
Distribution on 0800 567 5000.
