A B
2 mm
A B
Elev. / Rudd.
Plastic control horn
A
A’
A=A’
B
B’
B=B’
Plastic control horn
and back plate
2x12mm screw
.....3
...........6
WARNING! Securely glue together.
If coming off during flights, you lose control
of your airplane which leads to accidents !
FUSELAGE - TOP-VIEW
AUFSICHT
Cut away only the film
on the right and left of
the vertical stabilizer.
Apply a thin layer of machine oil or petroleum jelly to only the pivot point
of the hinges on the elevator, then push the elevator and its hinges into the
hinge slots in the trailing edge of the horizontal stabilizer. There should be
a minimal hinge gap.
When satisfied with the and alignment, hinge the elevator to the horizontal
stabilizer using 5 minute epoxy. Make sure to apply a thin layer of epoxy to
the top and bottom of both hinges and to inside the hinge slots. Repeat the
previous procedures to hinge the second elevator to the other side of the
horizontal stabilizer.
Hinge
Petroleum jelly
STABILIZER
A B
Apply 5 min.
Epoxy both the
top and bottom.
Vergewissern Sie sich, sauber geklebt zu haben.
Andernfalls konnen Probleme mit der Flugeigenschaft auftreten!
A
B
A B
FUSELAGE - TOP-VIEW
AUFSICHT
FUSELAGE - TOP-VIEW
AUFSICHT
7- Vertical stabilizer / Seitenruder
1
2
8- Elevator / Höhenruder
9- Control horn / Anlenkungen
