4.
Stand the bike up and reposition it so that it is centered on the wood pad
and the slots in the cross channel of the Motono Platform align with the foot
pegs.
5.
Raise the carriage using the hoist until the Motono Platform begins to lift the
bike off the floor.
6.
Insert the foot peg fasteners up
through the slots in the cross
channel and through the foot pegs.
Then place the foot peg washers
and knobs over the fasteners and
screw the knobs down until they
just start to pull on the pegs. These
foot peg fasteners are merely a
safety feature to ensure that the
dirt bike doesn’t rock forward and should not be tightened beyond contact
with the pegs. If you find that your bike can rock backwards or for extra
security, use a tie down strap to secure the front of the frame to the front
cross channel of the Motono Platform.
7.
Raise the carriage to the desired height using the hoist while making sure
you don’t crash the bike into the ceiling.
8.
Removing the bike is the reverse operation.
9.
To lift more than one dirt bike, load the first as described in steps 1-9 above.
Then with the first bike lifted, hang a fully extended carriage tie strap from
the bottom loop of the first carriage with the short end up. Then add a
