AF-JA/JZ-150129
Microwave Motion Sensor
Model: HC002S
99 190 12
InStructIon Manual
EN
the sensor is an active motion detector; it emits a high-fre-
quency electromagnetic wave 5.8GHz and receives its echo.
the sensor detects the change in echo from movement in
its detection zone. a microprocessor then triggers the switch
light on command. Detection is possible through doors, glass
panels and thin walls.
NOTE:
the high-frequency output of this sensor is <0.2mW;
approximately just 2‰ of the transmission power of a mobile
telephone or the output of a microwave oven.
lED indication
Daylight sensor
tEcHnIcal SpEcIfIcatIonS
IMPORTANT
PLEASE READ THESE INSTRUCTION CAREFULLY PRIOR TO INSTALLATION AND RETAIN THIS LEAFLET IN A
KNOWN AND SAFE PLACE FOR FUTURE REFERENCE.
product type:
Microwave Motion Sensor
operating voltage:
220-240V~ 50/60Hz
Hf system:
5.8GHz cW radar
transmission power:
<0.2mW
rated load:
1200W (resistive load),
400W (capacitive load)
Detection angle:
30-150º
power consumption:
approx 0.5W
Detection range:
Max. 12 m in diameter, adjustable
time setting:
5 s ~ 30 min.
Mounting:
Indoors, ceiling or wall
light control:
2~50 luX, disable
Working temperature:
-20~60ºc
the sensor works with a main voltage of 220-240V ac
50/60Hz, 100-120V ac version is available on request.
the sensor has a 4-wire electrical interface:
nx2 (neutral / 220-240V ac)
l (phase / 220-240V ac)
l’ (switched phase / output)
InStallatIon & WIrInG
Sensorn funkar med spänning 220-240V ac 50/60Hz, en
version med 100-120V ac finns tillgänglig på begäran.
Sensorn har fyra plintar:
nx2 (nolla / 220-240V ac)
l (fas / 220-240V ac)
l’ (tändtråd)
Försäkra dig om att strömmen är helt avstängd innan
installation eller underhåll.
SE
Ensure that the electricity supply is switched off complete-
ly before installation or servicing this product.
EN
<0.2mW
approx. 100mW
