manualshive.com logo in svg

BEAMEX MC6-T, Руководство пользователя

Поделиться
Скачать
BEAMEX MC6-T Скачать руководство пользователя страница 9

Unpacking and Inspection - 9

Typographical Conventions

The following typographical conventions apply to the MC6-T User Manual:

Bold

 text is used in following situations:

• References to User Manual topics and parts,
• MC6-T keywords, i.e. terms shown in the User Interface and
• other keywords, e.g. the names of fieldbus parameters.

Note: 

 This is a note. Notes typically inform you of something

useful concerning the current topic.

CAUTION: 

 This is a caution. Whenever you see a caution, read

it carefully and take it seriously. By not observing cautions, you

may damage the calibrator.

Warning: 

 This is a warning. Whenever you see a warning, read

it carefully and take it seriously. By not observing warnings, you

may -at worst- damage the calibrator and/or even risk your life.

Unpacking and Inspection

At the factory each new MC6-T passes a careful inspection. It should

be free of scrapes and scratches and in proper operation order upon

receipt. The receiver should, however, inspect the unit for any damage

that may have occurred during transportation. If there are signs of obvious

mechanical damage, package contents are incomplete, or MC6-T does not

operate according to specifications, contact the purchasing sales office as

soon as possible.
If you have to return the device to the factory for any reason, use the

original packing whenever possible. Include a detailed description of

the reason for the return. Read also chapter 

Service and transportation

instructions

, section 

Safe delivery for service

.

For a description of available options, see 

Options

.

Содержание MC6-T













































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды