Beam Commercial, Руководство по эксплуатации

Страница: 3 / 20

3
IMPORTANT SAFEGUARDS
Read this manual carefully before starting operations of movement, unpacking, installation, use,
maintenance and decommissioning of the BEAM
Commercia l central vacuum unit.
SAVE THESE INSTRUCTIONS
WARNING
To reduce the risk of fire, electric shock or injury:
•
Vacuum units are for commercial use.
•
Do not use the machine for inappropriate purposes.
•
Do not suck up glowing embers, cigarette ends still lit, inflammable products or materials that
could cause flames in the dust collection container, materials with a high risk of explosions
or materials that individually are inert but that when mixed together may cause dangerous
chemical reactions.
•
It is prohibited to use vacuum units for unintended purposes in industrial facilities in the
presence of values of temperatures, pressure and humidity in excess of those of normal
workplaces.
•
Do not suck up liquids, ashes in fireplaces, large quantities of flour, printer toner, building site
dust, fine powder, cement or plaster, or hazardous dust.
•
Do not suck up plaster, cement or rubble.
•
Always disconnect the power supply at the electrical panel: during installation; if maintenance or
repair operations are necessary; if the system is not to be used for a long period.
• Do not under any circumstances whatsoever work on the unit while it is operating.
•
Wear protective gloves and a face mask for all maintenance work (emptying of dust container,
cleaning or replacement of filter).
•
Use only original spare parts.
•
Do not use the vacuum unit without the filter.
•
After all maintenance operations ensure that the filter has been replaced and correctly
tightened.
•
Do not obstruct air inlets or outlets.
•
Keep fingers and hands away from nozzles of accessories and openings of the vacuum unit,
and never direct the suction mouthpiece toward persons or animals.
•
This system is designed to be installed by adequately trained and instructed personnel. Ask the
installer carrying out the final system test to certify that the system has been correctly installed.
•
In case of fire, do not attempt to extinguish it with water. Failure to observe this instruction may
expose the operator to the risk of electric shock.