Beam Commercial, Руководство по эксплуатации

Страница: 10 / 20

10
3. MOVEMENT AND UNPACKING
The BEAM Commercial central vacuum unit is shipped fixed to a europallet inside a cardboard carton
to protect it during transport and delivery.
It is advisable not to remove the packaging until the moment of installation, to avoid possible damage.
Upon delivery check that the shipment is correct without any damages.
In case of any missing parts and/or damages proceed as follows:
•
Note the type of damage on the transport document (transporter’s copy);
•
Send the transporter a registered letter requesting compensation for the damage within two days;
•
Contact the distributor for any necessary replacement parts.
ATTENTION:
• Suitable lifting equipment must be used when moving the vacuum unit and particular care must
be taken to correctly balance loads.
• The support surface must not have a slope of more than 8%, to avoid the risk of overturning due
to loss of stability.
•
During movement operations use appropriate items of personal protection equipment.
•
Failure to use appropriate items of personal protection equipment during movement and
unpacking may expose the operator to the risk of crushing of the feet due to loss of stability.
•
Wear safety gloves for a safe grip during movement.
CAUTION:
•
Keep the vacuum unit right-side up at all times.
•
Do not use box cutters to remove packaging materials.
•
The manufacturer declines all and any liability for damage caused by the incorrect unpacking of
materials.
Figure 4.