9602 SBD Modem | Installation and User Manual
11
How to Mount the 9602 SBD Modem
The 9602 Modem is designed to be mounted using the two 4mm holes on the connector end of the
enclosure. Self-tapping screws (eg. #6), or M3 or M4 machine screws/bolts can be used to mount
the modem to a flat surface. Please note mounting screws are not included.
NOTE:
•
To ensure reliable sturdy fixing:
•
Mount the 9602 Modem on a clean, even surface.
•
Use the correct type of screws.
•
If mounting on brick or poured concrete surface, let the cement completely dry before
you mount the unit.
•
If mounting on a wooden surface, make sure the wood is structurally sound.
•
Leave enough room around the unit to allow unhindered access to the rear panel.
•
Do not install the unit in a permanently concealed recess. You must be able to access
and remove the unit should future service/configuration be required.
In installations where the mounting surface lacks the strength to securely retain the unit with only 2
screws, the included L-bracket can be attached to the top side, providing a 3rd 4mm mounting hole.
