background image

6

Painting

The grille may be painted, however apply as light as possible to avoid clogging the fine 

holes within the grille. Only paint grilles when they have been removed from the speakers 

and be sure to remove the cloth on the backside of the grille before painting. If the cloth is 

not removed for painting, it will absorb the paint and clog the grille, significantly affecting 

the sound...and not in a good way. (We have taken great effort to eliminate any ‘color’ from 

the sound of our speakers, so let’s try to keep it that way...OK?)

SPEAKER TROUBLESHOOTING

PROBLEM

SOLUTION

NO SOUND

Verify that there is audio from the 

source selected. Select another 

source if necessary.
Ensure that the amplifier is turned 

on and connected properly.
Check any connections at other 

devices, such as a volume control. 

Temporarily bypass the control if 

needed.
Check wire connections at each 

speaker not producing sound for 

good contact to bare wire, not wire

insulation.

Troubleshooting

Beale Street Audio speakers are designed to function trouble-free. Most problems that 

occur are due to simple issues. If you have trouble, please check the list of simple fixes 
below.

Содержание IW5-BSC









Отзывы: