Page 6 of 26
3. Installation
Provide adequate ventilation
Ventilation slots are located on the rear of the housing.
Ambient temperature
The permissible ambient temperature range must not be violated.
Minimize reflections
The display should be positioned so that reflections of lights, windows,
furniture with shiny surfaces or light-colored walls do not appear on
the screen.
Minimize mirroring
In order to reduce mirroring on the unit, ceiling lighting or reflected
light (no dazzling) should be used. Mirroring can only be eliminated
if the screen is clean and free of grease. Clean the display using a
suitable micro fiber cloth.
Change of environment
If the unit is brought into a warm environment from a cold one, water
may condense upon it. The unit should not be switched on until all the
condensed water has evaporated, including that inside the unit. This
may take several hours, depending on the conditions.
4. Start-up
Caution
In order to ensure safe operation of the equipment, close attention
must be paid to the information contained in this Instruction Manual
as well as the warnings in Section 2 "Safety precautions".
Caution Information for end customer
None of the settings must be changed on site by the user, otherwise
the guarantee is canceled. This also applies to settings made using
the HL1916S SERIAL keys. These are therefore locked for certain
applications. If settings have to be changed, please contact the
responsible servicing department.
The display is designed for individual connection to a graphics card
with a power supply of 100 or 240 Volt (TN-S system with PE conductor).
