Page 17 of 26
6.3.2 Key functions without active OSD menu
Key
Action
Menu
Activate OSD
Up
Define VGA port
Down
Select DVI-D,DP, VGA input source
Note:
While there is no sync in VGA input, there is instruction on the OSD to indicate that how to
define the analog input as VGA input. Press and hold the ‘UP’ key for about 2 seconds, the
monitor will change the analog input between VGA.
The ‘Down’ key function is used to select input source and is enabled only when OSD menu
is locked. This function can be enabled or disabled through OSD selection. This choice is
in case all the signal sources are available. If not, the monitor will auto search DVI-D,
DP and VGA.
6.3.3Key functions in the OSD menu
Key(s)
Situation
Action
Menu
Always
Jump to next line
Up
Slide controller
Increase value
Command
"Enter key"
Down
Slide controller
Decrease value
Set
Sub-menu
Return to previous menu
6.3.4 Menu calls
Press the “Menu” key while the OSD is active, the function icon will
jump to next line. Pressing the “Up” key, the coordinate submenu will
be selected. Press “Set” key to return to the main menu while in the
submenu state.
6.3.5 Locking of OSD menu
Keys
Action
1x Set key,
then 3x Up key
Lock or unlock OSD
