Page 2 of 4
75.5868.01 900 MHZ TOUCHLESS RETROFIT TRANSMITTER 20160412
•
The device should not be used for purposes other than its intended use. All other uses cannot be
guaranteed by the manufacturer of the sensor.
•
The installer of the door system is responsible for carrying out a risk assessment and installing the sensor and
the door system in compliance with applicable national and international regulations and standards on door
safety.
•
The manufacturer of the sensor cannot be held responsible for incorrect installations or inappropriate
adjustments of the sensor.
1
2
3
Remove existing touch
pushplate and disconnect two
(2) existing in-wall wires from
pushplate and door control
activation.
Connect green and white
wires to new touchless plate
activation output.
Parallel red and black wires
with two (2) existing in-wall
wires and connect to new
touchless plate power input.
INSTALLATION
4
5
6
Mount new touchless plate.
Connect two (2) existing in-
wall wires to power source in
door control header.
Install 900 MHz wireless
receiver in header (sold
separately).
Shut off all power going to header before attempting any wiring procedures.
Maintain a clean & safe environment when working in public areas.
Constantly be aware of pedestrian traffic around the door area.
Always stop pedestrian traffic through the doorway when performing tests that may result in unexpected reactions by
the door.
ESD (electrostatic discharge): Circuit boards are vulnerable to damage by electrostatic discharge. Before handling
any board ensure you dissipate your body’s ESD charge.
Always check placement of all wiring before powering up to ensure that moving door parts will not catch any wires
and cause damage to equipment.
Ensure compliance with all applicable safety standards (i.e. ANSI A156.10) upon completion of installation.
DO NOT attempt any internal repair of the components. All repairs and/or component replacements must be per-
formed by BEA, Inc. Unauthorized disassembly or repair:
1. May jeopardize personal safety and may expose one to the risk of electrical shock.
2. May adversely affect the safe and reliable performance of the product resulting in a voided warranty.
PRECAUTIONS