Page 8 of 8
75.5696.07 IS40P 20170313
Tech Support: 1-800-407-4545 | Customer Service: 1-800-523-2462 | General Tech Questions: [email protected] | Tech Docs: www.beasensors.com
©
BE
A
|
O
ri
gi
na
l i
ns
tr
uc
ti
on
s
|
75.
56
96
BEA hereby declares that the MILAN is in conformity with the basic requirements and the
other relevant provisions of the directive 2004/108/EC.
Angleur, April 2011
Jean-Pierre Valkenberg, authorized representative
The complete declaration of conformity is available on our website: www.bea-industrial.be
Only for EC countries: According the European Guideline 2002/96/EC for Waste Electrical and Electronic Equipment (WEEE)
Upon completion of the installation or service work, at a minimum, perform a safety inspection
for the type of Door/Gate per the manufacturer recommendations and/or per ANSI/DASMA guidelines
for best industry practices. Some examples but not limited to are ANSI/DASMA 102, ANSI/DASMA
107, UL 325. Make certain all appropriate industry warning labels are applied. It is the responsibility
of the installer/service personell to be familiar with national and local codes, standards, and regulatory
requirements. BEA Inc. recommends for installers and service personnel to be factory trained for the
type of door/gate system prior to performing installation or service.
ACCESSORIES
10INDBRACKET
10MINIDBRACKET
10BR3
10REMOTE
1024VAC
10SPOTFINDER
MODULAR
COLUMN LIGHT
COLUMN LIGHT
DUAL LED
TRAFFFIC LIGHT
SINGLE LED
TRAFFIC LIGHT
