Page 2 of 8
75.5696.07 IS40P 20170313
DIMENSIONS ( inches )
Avoid proximity to neon
lamps or moving objects.
Do not cover the
sensor.
Avoid extreme
vibrations.
Avoid exposing the
sensor to sudden
temperature changes.
Wall mounting
Ceiling mounting
Bracket dimensions
MOUNTING TIPS
The installer of the door system is responsible for carrying out a risk assessment and installing the sensor and the
door system in compliance with applicable national and international regulations and standards on door safety.
SAFETY INSTRUCTIONS
The warranty is void if
unauthorized repairs
are made or attempted
by unauthorized
personnel.
Only trained and
qualified personnel
may install and setup
the sensor.
After installation,
save an access code
to lock the sensor.
Test the sensor for proper
performance before
leaving the premises.
LED- SIGNAL
Activation/Pulse detection
Presence detection
LED flashes
Parameter indication for manual setup
LED flashes quickly
LED flashes
Value indication for manual setup
Setup
•
This device IS NOT intended for use as a safety sensor.
•
Not recommended for dynamic envioronments. (snow, rain, fog, etc.)
•
Shut off all power before attempting any wiring procedures.
•
Maintain a clean & safe environment.
•
Constantly be aware of pedestrian/vehicle traffic around the area.
•
Always stop pedestrian/vehicle traffic through the doorway when performing tests that may result in unexpected reactions
by the door.
•
ESD electrostatic discharge: Circuit boards are vulnerable to damage by electrostatic discharge. Before handling any board
ensure you dissipate your body’s charge.
•
Always check placement of all wiring before powering up to insure that moving parts will not catch any wires and cause
damage to equipment.
•
Ensure compliance with all applicable safety standards upon completion of installation.
•
DO NOT attempt any internal repair of the sensor. All repairs and/or component replacements must be performed by BEA Inc.
Unauthorized disassembly or repair:
1. May jeopardize personal safety and may expose one to the risk of electrical shock.
2. May adversely affect the safe and reliable performance of the product and will result in a voided product warranty.
PRECAUTIONS
