BE RX800, Инструкция по эксплуатации

Страница: 9 / 20

h) For those who cannot put the cuff on the left
arm, put it on the right arm as shown.
i) Consecutive measurements will cause blood
accumulation in the lower arm which will
affect the measuring results. To improve
reading accuracy, raise the arm being
measured, squeeze and relax your hand
several times, then take another measurement.
Another option is to take the cuff off and
wait at least 10 minutes before repeating
measurement.
j) If this device was stored in low temperature, it is
necessary to leave it in room temperature for at
least 1 hour, otherwise the measurement can be
inaccurate.
ATTENTION: Do not use cuff other than the original cuff contained in this kit!
2.7 Storing the Cuff
The cuff used for measuring blood pressure is a
delicate component of the device and should be
stored carefully when not in use.
h)
i)