BE RX800, Инструкция по эксплуатации

Страница: 12 / 20

1. When the device is powered on for the first time,
the display will show as Fig. 1.
2. Press and hold button ‘M’ , then press button ‘O/I’ , and the year number flashes.
3. Press button ‘M’ to change the year number and press button ‘O/I’ for
confirmation.
4. When the year setup is finished, the month number will flash automatically.
Follow the same instruction as above to set month, date and time.
5. Press button ‘O/I’ to finish setup. If you want to change the date and time,
please repeat steps 2, 3, 4.
Note: When in the Date/Time setting, if no button is pressed in 1 minute, the
device will automatically return to standby mode.
7. Measuring Your Blood Pressure
1. Insert the tube plug into the cuff connection. Before the measurement, take 5
minutes to relax yourself. Don’t talk or move your arm.
2. Press button ‘O/I’ , and all symbols will appear on display for 2 seconds as Fig. 2.
Then two short beeps will sound and ‘0’ will appear on the screen. Pump begins
to inflate with display showing the reading of pressure. Generally the pressure
will reach 190 mmHg as Fig. 3.
3. The pump will stop inflating and pressure begins to decrease gradually, during
which the user’s blood pressure and pulse will be calculated as Fig. 4.
Fig. 1
Fig. 2 Fig. 3 Fig. 4