BE RX800, Инструкция по эксплуатации

Страница: 8 / 20

c) Pull the cuff and tighten it by attaching the
Velcro
®
fastener. Normally, the left arm is used,
unless there is a physical reason for using the
right arm.
d) The cuff should fit snugly around the arm, but not
too tight. You should be able to fit two fingers
under the cuff.
e) Place the arm on the table (palm facing
upwards) so that the cuff is at the same level
as the heart. Make sure there is no kink in the
hose.
f) You can adjust the level of your arm by putting
a cushion under your arm.
g) Remain seated in a comfortable room
temperature for at least 5 minutes, then
start the measurement.
c)
d)
e)
f)
g)