BE LS5TELL, Руководство по эксплуатации

Страница: 18 / 32

18
Pre-Operation
WARNING
• Do not allow familiarity with tools to make you care- less. Remember
that a careless fraction of a second is sufficient to inflict serious injury.
• Always wear safety goggles or safety glasses with side shields when
operating this tool. Failure to do so could result in objects being
thrown into your eyes resulting in possible serious injury.
• Do not use any attachments or accessories not recommended by the
manufacturer of this tool. The use of attachments or accessories not
recommended can result in serious personal injury.
BEFORE USING THE LOG SPLITTER
• Always block the wheels to prevent movement of the log splitter while in
operation.
• Clear the work area.
• Check that all nuts, bolts and hydraulic fittings are tight to be sure the
equipment is in a safe working condition.
• Make sure your outlet type, voltage, and frequency match the data
stated on the serial number label (or “Technical Specifications” in this
manual).
• Check that the switch, power cable and plug are not damaged (no
cracks, etc.) to prevent the risk of electric shock or a short circuit.
• Wear non-slip safety shoes, safety goggles, safety gloves, protective
hair covering and suitable work clothing. Never wear jewelry, necktie
and other loose clothing.
Loosen the hydraulic vent plug to release any trapped air that may have
accumulated during shipping. Operate the log splitter for several cycles
to repel the air. Do not move the splitter while the vent plug is loosened
as the hydraulic fluid could spill out. Air must flow in and out of the oil
tank during operation to prevent the seals in the hydraulic system from
rupturing. Refer to the oil tag for further details.
NOTICE
• Failure to loosen the hydraulic vent prior to operation of this product
may cause abnormal splitting or the seals in the hydraulic system to
blow out. Blown seals could cause permanent damage to the log
splitter.
PRE-OPERATION