BE LS5TELL, Руководство по эксплуатации

Страница: 25 / 32

25
drain oil from reservoir
place log splitter in vertical position
note acceptable oil fill level
refill oil to desired level
• Refill the oil tank with fresh hydraulic oil (3.8 liters or 4 quarts).
• Place the cleaned dipstick into the oil tank. Remove and check the oil
level.
• Level down the log splitter, start the motor and cycle the ram several
times to remove excess air from the reservoir.
• Use AW32 hydraulic fluid.
• Replace oil drain bolt. Tighten securely.
• Dispose old oil at an oil recycling center.
• Refer to the oil tag for additional details.
NOTICE
The oil level should be between the two grooves around the bottom of
the dipstick.
MAINTENANCE