background image

22

warranty

BE Pressure Inc. warrants that each new product will be free of any 
manufacture defects in workmanship for the set warranty period of the 
product. Warranty applies to the original purchaser of the product and 
cannot be transferred.

This warranty does not cover normal wear items, including but not 
limited to: seals, packings, valves, o-rings, spark plugs etc. Warranty 
does not include normal maintenance like oil changes, filters or valve 
adjustments. Nor does it include misuse of product. Warranty approval 
is at the sole discretion of BE Pressure Inc.

In no event shall BE Pressure Inc be liable for any indirect, incidental 
or consequential damages from the sale or use of the product. This 
disclaimer applies both during and after the term of this warranty. BE 
Pressure Inc disclaims liability for any implied warranties, including 
implied warranties of merchantability and fitness for a specific purpose, 
after the applicable term of this warranty. 

1. Tanks – 2 Years

2. Honda Engines

          a. GX – 3 Years

              **Must contact local Honda Power Equipment for warranty**

3. Baldor Engines - 2 Years

              **Must contact Baldor for warranty**

4. PowerEase Engines and Motors - 2 Years or 1000 Hours

5. Pumps - 2 years

 

Содержание AC658HB

























Отзывы: