11
GB
INSTRUCTIONS FOR ASSEMBLY AND USE
1: To open the pushchair chassis, release the folding catch A, lift the handlebar upward and make sure
it locks into the correct position as shown in Pic. 2
3: Insert the wheel into the plastic base to assemble the front wheels.
To detach the front wheels, press the button under the plastic base and pull the wheel outwards.
4: Push the rear wheel set into the corresponding hole and push until you hear it click into place.
5. Press the button to release the rear wheel.
6: Insert the bumper bar into the plastic base until you hear it click as A. To release, press the button
and pull outward.
7: To fit the hood, insert the slots at the edge of the hood into the guides on the sides of the frame.
8: To attach the carrycot, position it on the chassis and push it downwards until you hear it click.
9: Carrycot after unfolding.
10: Press button A on both sides to adjust the height of the handlebar.
11: To lock the front swivel wheels, press the locking lever downwards. To unlock the front swivel wheels,
lift the lever up.
12: To engage the brake, push the brake bar down. To release, lift the brake bar.
13: Press the button on both sides to adjust the height of the footrest.
14: Press button A to release the buckle.
15: Press the lever on the backrest to regulate and adjust the position of the backrest upwards or
downwards.
16: To detach the seat, simultaneously pull the unlocking levers situated on both sides and lift.
What’s more, the hammock is reversible so it can be positioned facing you or facing forwards.
17: To fold the chassis, press the button on the right side, then pull the locks on both sides upward,
and push the handlebar downwards. The folding catch will automatically engage.
18: Chassis after folding.
19: ADJUST THE SEAT BELTS TO FIT THE CHILDREN WHENEVER THEY USE THE PUSHCHAIR
The two side fastening points of the seats can be used to attach an additional harness. Your pushchair
is approved for new born babies. To fit the belts on your baby when he is under 6 months old, pass the
shoulder straps through the lower holes and fasten the shoulder protector pads using the Velcro. When
your child is over 6 months old, pass the straps through the holes that are most comfortable for the child.
GUARANTEE INFORMATION
This article is guaranteed in accordance with R.D. 1/2007 of 16th November. Keep your receipt as proof of purchase, you need to
show it at the store where you purchased the product to prove validity in the event of any type of claim. This guarantee does
not cover any faults or breakages caused by misuse of the article or by not following the safety and maintenance information
listed in the instructions and on the care labels.
MAINTENANCE
-Wash the plastic parts in warm soapy water. Afterwards, carefully dry all the components.
-The cover can easily be removed for washing.
-Wash by hand and at a temperature never above 30ºC. Dry naturally in a shaded place.
-Prolonged exposure of the cover to sunlight may affect the stability of the fabric colour.
IM 2001 PLEAT BECOOL.indd 11
26/9/17 14:16
