Be Cool Flow Iso-Fix, Руководство пользователя

Страница: 17 / 48

EN
17
¡IMPORTANT! Keep these instructions
for future reference
Before using our product, please, read the
instruction manual carefully.
The FLOW ISO-FIX car seat is a safety device and
it is only safe when used in accordance with the
instruction manual.
The product must be only be used on a forward
facing seat that is fitted with an automatic 3-point
safety belt which is approved according to ECE
R16 or an equivalent standard, and with a 3-point
universal Isofix system.
The product may be used only on the back seat.
The product has been approved according to the
strictest European safety standards (ECE R44/04)
and is suitable for Group I (9-18 kg), Group II (15-25
kg) and Group III (22-36 kg).
Any alteration or addition to the device without due
authorisation from
BABYNURSE may seriously compromise the safety
of the retention system.
If the instructions for the correct use of the
retention system are not followed carefully, baby’s
safety will be endangered.
This safety device cannot be used without its fabric
covering, nor may it be replaced by any other that
is not identical to the original, since it forms an
integral part of the system’s features.
Never leave your child unattended in the car.
WARNING: Check the road traffic regulations in the
country where you are travelling. The use of your
child restraint system may be restricted.
RECOMMENDATIONS
Keep this instruction book for future reference.
Make sure that any luggage or other objects inside
the car that may cause damage in case of an
accident are properly stored and restrained.
FLOW ISO-FIX car seat must be appropriately
fastened with Isofix anchors even when not in use
because in the case of an accident this may be
sent flying causing injury to any of the occupants
of the car.