Seite 15 von 19
START UP
PREPARATION FOR USE
!IMPORTANT!
Let the Partycooler stand upright for at least 1 hour, before using it for the first time, so that
the coolant circuit can calm down after the transport.
Please observe the notes in the chapter "Important information on safety, location and
electrical connection".
If the socket is properly grounded, place the device on a level surface.
The distance to walls or other objects must be at least 50 cm.
Before using the device, make sure that the ventilation openings in the housing, around
the device and in the installation niche are not blocked and secure it against rolling away
with the roller lock.
Clean the inside with lukewarm water and mild detergent and then wipe the device dry
before using it.
INSTALLATION
With only a few easy steps, you can put the Partycooler into operation:
Hang the bottle holder and the
sidetables in the handle on the outside
of the device.
!IMPORTANT!
Load the sidetables with a maximum of 3kg!
