Seite
21
von
27
4. COMMISSIONING THE REMOTE CONTROL
Please refer to the following instructions:
To use the remote control for the first time, please pull the plastic protection out of the
battery compartment.
To change the battery, proceed as follows:
1. Pull out the battery holder on the back of the remote control, remove the old
battery and then insert a new one:
2. Please always pay attention to the polarity markings (+/-) on the
battery and the battery holder.
3.
Then slide the battery holder all the way back into the remote control.
5. SET FUNCTIONS
1.
ON/OFF
Use the on / off button to turn the device on and off. As soon as you switch on the
device, mist emerges from the mist nozzles on the top of the device and the current
temperature in C ° and humidity in% are shown alternately on the display.
NOTE
When you switch on the device and the water tank is empty
- indicator lights
up on the display.
2.
FOG LEVEL
Use the Fog Level button to set the strength of the mist
You can choose between three different levels:
•
1 x press
Lowest Level
appears on the display
•
2 x press
Middle Level
appears on the display
•
3 x press
Highest Level
appears on the display
