Seite
24
von
27
SAFETY MEASUREMENTS
The BECOOL humidifier is equipped with a protective device that is intended to
protect the device from possible damage.
SHUTDOWN FUNCTION
As soon as the water tank is empty or it is removed, the device switches off
automatically.
CLEANING INSTRUCTIONS
Before cleaning the device, switch off the humidifier, pull the power plug and then wait
approx. 10 minutes until the device has completely cooled down.
Cleaning the case:
• Clean the device with a soft, moderately damp cloth and then wipe it with a dry cloth.
Cleaning the base/water pan:
• Remove the water tank from the base to expose it.
• Always empty the water in the direction of the marking in the
base, otherwise water could get inside the device and damage the
device:
• If dirt remains in the base, pour some clear, fresh water into the base and use
a sponge to remove the dirt. Then pour the water out over the marking again.
• Now wipe the inner part of the base with a moderately damp cloth and then
dry it with a soft cloth.
Cleaning the water-mist converter
• The mist converter is located in the middle of the water tub - this must be cleaned
regularly so that the device generates the mist correctly.
• If the water quality at your location is hard, use a lime and scale dissolving cleaner
such as white vinegar or cider vinegar. (do not use dark vinegar)
• Depending on how dirty it is, put more or less cleaner on the surface of the
converter and fill the tub with water.
• Leave the cleaner and water on the converter for 10 to 15 minutes act.
• Clean the converter with a brush until the deposit is removed.
• Rinse twice with water.
• Do not use any metallic or hard objects for cleaning, which could damage the
converter!
