Seite
19
von
27
START UP
The installation and operation of the BE COOL humidifier is very quick and
uncomplicated:
1. INSTALLATION
1. Take the humidifier out of the packaging and remove all packaging materials.
2. Check the device for possible damage.
3. Unwind the power cord and check it for damage.
4. Place the humidifier on a stable, level and heat-resistant surface so that it
cannot tip over.
5. Now insert the power plug into a suitable socket.
CAUTION
Please carefully follow the instructions for setting up the device in the safety
instructions
.
2.COMMISSIONING
•
Fill the water tank as follow:
1. Remove the top cover of the humidifier.
2. Fill the water tank, being careful not to overfill it.
3. Place the top cover back on the device and turn the mist outlet
nozzles to any position.
IMPORTANT
Please note the following when filling the water tank:
• Do not use any essential oils in the water tank (e.g .: eucalyptus or
menthol) as these could damage the device.
• Do not put metals, chemicals or detergents in the water tank.
• Never fill the water tank completely.
• Never fill the water tank with water with a temperature over 40 ° C to
avoid deformation.
• Fill water only into the water tank and never into the other parts of the
humidifier.
• Never fill the water through the steam outlet.
• If the room temperature is less than 0 ° C, empty the water tank as
freezing water could damage the humidifier.
