BE-TRXX USER MANUAL
5
WARRANTY
In order to ensure safety. All persons working at and/or with this machine must read and understand this
operation manual. Furthermore, this machine shall always be used, handled and stored in accordance with
the design and construction destination (intended use) which also means:
• Exclusively work in accordance with the instructions given in the appropriate assembly, operation and repair
instructions (manual) including all valid errata supplements as well as taking into account the relevant
service bulletins; exclusively use correct tools and equipment being in a perfect condition.
• Strictly observe the applicable local regulations concerning safety and accident prevention, generally
acknowledged and approved technical, medical and traffic rules as well the functional limitations and safety
instructions stated in above mentioned technical documentation.
• Do not use any parts (spares, accessories, lubricants) other than those complying with manufacturer
requirements. A part complies with manufacturer requirement when either genuine or approved by
the manufacturer or when all its properties can be proven to meet with the appropriate manufacturer
requirements for that very use/function.
• Only well instructed people being familiar with all possible danger shall work with or at the machine.
• The machine shall not be used nor transported unless all safety devices (cover, plates, rails, curtains, locks,
etc). are correctly installed and in a perfect condition and set in the appropriate safety position. All safety
decals and signs shall be legible and in the correct place.
• Unauthorized modification of or arbitrary changes on the machine or parts of it exclude any responsibility
and reliability of the machine manufacturer for the consequences of that operation.
ATTENTION:
Those disregarding above mentioned rules act grossly negligent (careless) through which all manufacturers
warranty and reliability for damages and all other consequences become extinct.
The negligent person carries all risks!
Safety decals
This machine has been marked with safety decals of the new generation in accordance with ISO11684, i.e.
without text. The decals are shown below.
TR 2005:
DANGER:
Stop the engine and ensure it cannot be re-started during performance of work on the machine!
TR 2011:
DANGER:
When three-point linkage is controlled from outside ensure no one is between tractor and machine!
