BE-TRXX USER MANUAL
7
ADJUSTMENT FOR RAKING AND WINDROWING
1. Tines
Place the tines in the raking position by moving the tine pivot shaft. Check
all tines are in the correct position.
2. Wheels
The wheels must be set in the upper or middle position for this operation; i.e.
the machine will be in its lowest position.
3. Top Link
The top link is attached in the upper hole of the hitch-frame. When the point
of the tines exactly touch the stubble in front of the rotors and the machine
turns at full speed the length of the top link is correct. At 430 RPM of the
PTO, the tines have reached their lowest position.
4. Swath Deflectors
By placing the swath deflectors in the position shown an equal swath is built.
5. Locking Device
Disconnect the locking device.
