background image

2     

USER MANUAL

Before operating this device, be sure to read all content within this manual, ensuring that you understand the 
operating procedures, maintenance requirements and all safety warnings.
The owner and/or operator shall have an understanding of the product, its operating characteristics, and 
safety instructions before utilizing this device. Safety information shall be emphasized and understood. If 
the operator is not fluent in English, the product and safety instructions shall be read to and discussed with 
the operator in the operator’s native language by the purchaser/owner or his designee, making sure that the 
operator comprehends their contents.

• Study, understand, and follow all instructions before opera ng this device.
• Do not exceed the rated capacity stated.
• Use only on hard level surfaces.
• This item is to be used as a lifting device only. Immediately after lifting, support the vehicle 

with appropriate means.

• Do not move or dolly the vehicle while it is on the jack.
• Lift only on areas of the vehicle as specified by the vehicle manufacturer.
• No alterations shall be made to this product.
• Failure to heed these markings may result in serious personal injury and/or property damage.

IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE

ACTIONS TO HELP PREVENT DANGEROUS SITUATIONS

Содержание 35.400.002

















Отзывы: