USER MANUAL
3
• Prior to each use, visual inspection shall be made to the device by checking for abnormal conditions, such as
cracked welds, damaged, loose, or missing parts.
• Consult the vehicle owner’s manual to determine the location of support points.
• Be sure to set the vehicle in park with the emergency brake on and wheels securely chocked.
• Be sure that the vehicle and bottle jack are on a hard, level surface.
• Inspect the air line for cracks, fraying or other faults before each use. Discontinue use if the air line is damaged
or hissing is heard from the air line or connectors while operating the bottle jack.
SETUP
LIFTING
SETUP, OPERATION & PREVENTIVE MAINTENANCE
1. Turn release valve clockwise until firmly closed using narrow end of handle. (Fig 2)
2. Place jack under vehicle at proper lifting location. (Refer to vehicle owner’s manual.) Turn the extension
screw on jack counterclockwise until it comes into contact with vehicle. (Fig 3)
3. Connect the air inlet fitting into the shop air supply hose lock fitting, then turn on the air valve.
4. Raise the load to the desired height, then turn off the air valve.
5. When air source is not available Insert handle into pump socket and pump until desired height is reached.
(Fig 4)
6. Immediately support load with jack stands.
LOWERING
1. Remove lift handle from pump socket and using narrow end of the handle to turn release valve slowly
counterclockwise. Do not turn more than 2 full turns.
2. When vehicle is fully lowered, remove jack. (If extension screw has been extended, turn extension screw
until it retracts enough to safely remove jack).
*Only for
35.310.012 and
35.310.020