BDS AirMAB 5000, Руководство по эксплуатации

Страница: 7 / 19

6
Safety
AirMAB 5000
GB
Danger in conjunction
with polymers
WARNING
Risk to health from PTFE (synthetic
fully fluorinated polymers)
Absorbing or inhaling PTFE is a health
risk!
Pay attention to the following safety notes
to avoid danger from PTFE because
PTFE particles can deposit on the inside
of the housing as a result of operating the
drive unit:
Do not smoke when carrying out
►
maintenance work.
PTFE particles may not come into
►
contact with naked flames, embers
or heat
Motor parts must be cleaned with a
►
cleaning solution and not by blowing
compressed air.
After completing all work, wash your
►
hands.
Danger from compressed air
WARNING
Risk of injury when applying non-per-
missible pressures!
Pay attention to the following safety notes
to avoid danger from compressed air:
Only operate the machine with
►
prescribed air quantity and operating
pressure.
Danger of explosion if not observed.
Risk of injury
WARNING
Risk of injury from motor starting
unintentionally!
Pay attention to the following safety
notes to avoid danger from motor starting
unintentionally:
To completely stop the motor:
►
Move the motor switch to the OFF
position.
Disconnect the compressed air sup-
ply.
WARNING
Improper handling of the machine
increases the risk of injury!
Observe the following safety precautions
to avoid injuring yourself and/or others:
Operate the machine only with the
►
protective equipment stipulated in
these operating instructions (see
Personal protective equipment
section).
Do not
►
wear protective gloves when
the machine is running. A glove can
be caught by the drilling machine and
torn off the hand. Risk of losing one
or more fingers.
Remove loose jewellery before begin-
►
ning work. Wear a hair net if you have
long hair.
Always switch off the machine before
►
changing tools, performing main-
tenance or cleaning. Wait until the
machine has come to a complete
standstill.
Always disconnect the compressed
►
air supply before changing tools,
cleaning or performing maintenance
work in order to avoid unintentional
starting of the machine.