BD FocalPoint GS Скачать руководство пользователя страница 157

Страница: 157 / 242

157

16 BD FocalPoint™ Slide Profiler Maintenance

The BD FocalPoint™ GS Imaging System requires occasional maintenance to ensure that all

components remain in good working order. This section describes the required procedures and

is organized in the following manner:
•

Maintenance Schedule (Section 16.1)

•

Cleaning the Trays (Section 16.2)

•

Cleaning the Calibration Plate (Section 16.3)

•

Inspecting the Air Filter (Section 16.4)

•

Cleaning the Monitor (Section 16.5)

•

Cleaning the Outer Surfaces of the Instrument (Section 16.6)

•

Printer Maintenance (Section 16.7)

•

Cleaning the Mouse (Section 16.8)

•

Changing the Backup Media (Section 16.9)

Once every 12 months, preventive maintenance is required to be performed by BD authorized

service personnel.

16.1 Maintenance Schedule

Certain components must be cleaned or serviced at regular intervals. Table 16

1 lists the service

intervals for those components that must be cleaned on a regular basis.

A Maintenance Schedule is provided in Section 24. Use this schedule as a master copy. Each

month make a photocopy of the schedule and perform the maintenance tasks as required. Initial

each task as it is completed.

16.2 Cleaning the Trays

When not in use, store the slide trays in a covered bin to keep them clean and to reduce dust

accumulation. To prevent the trays from jamming and to prevent the internal calibration plate

from becoming excessively dirty, clean all trays weekly.

Interval

Component

Procedure

Weekly

Slide Trays

See Cleaning the Trays (Section 16.2)

Air Filter

See Inspecting the Air Filter (Section 16.4)

Bi-Monthly/Monthly Backup Media

See Changing the Backup Media (Section 16.9)

As Needed

Monitor

See Cleaning the Monitor (Section 16.5)

Outer Surfaces of

Instrument

See Cleaning the Outer Surfaces of the

Instrument (Section 16.6)

Replace Printer Toner

Cartridge

See Printer Maintenance (Section 16.7)

Clean Mouse

See Cleaning the Mouse (Section 16.8)

Clean calibration plate

See Cleaning the Calibration Plate (Section 16.3)

Table 16

1 Component Maintenance

Содержание FocalPoint GS



















































































































































































































































Результаты поиска

Содержание FocalPoint GS

Отзывы:

BD FocalPoint GS, Руководство пользователя, Страница: 157 / 242

Результаты поиска

Содержание FocalPoint GS

Отзывы: