BD FocalPoint GS Скачать руководство пользователя страница 160

Страница: 160 / 242

BD FocalPoint™ GS Imaging System Instrument User’s Manual

160

Figure 16

2 – Inspecting the air filter

16.5 Cleaning the Monitor

Clean the monitor as necessary to remove fingerprints, dust, or any other debris.

The following materials are required:

•

Lint-free cloth

•

Glass cleaning solution (DO NOT use an alcohol based cleaner)

To clean the monitor:
1

Turn off the power to the monitor using the switch on the front of the monitor. Remove the

power plug from the power outlet.

Spray the cloth with the glass cleaner.

Wipe the face of the monitor clean.

Plug the monitor’s power cord into the power outlet. Apply power to the monitor by pressing

the switch on the front of the monitor.

16.6 Cleaning the Outer Surfaces of the Instrument

The following materials are required:

•

Lint-free cloth

•

Non-abrasive household cleaning solution

WARNING

SHOCK AND FIRE POTENTIAL. FAILURE TO UNPLUG THE

MONITOR FROM THE POWER SOCKET BEFORE

PERFORMING THIS PROCEDURE COULD RESULT IN AN

ELECTRIC SHOCK OR FIRE.

8 1/2 X 11 Paper

Air Filter

Содержание FocalPoint GS



















































































































































































































































Результаты поиска

Содержание FocalPoint GS

Отзывы:

BD FocalPoint GS, Руководство пользователя, Страница: 160 / 242

Результаты поиска

Содержание FocalPoint GS

Отзывы: