1-800-543-1040
bcs
america
.com
4
The Drip Tape Layer (DTL) Kit is sold separately from the PML
and consists of two pieces that are installed on the front and
rear of the implement. The Shovel is installed on the front of
the implement and the Spool Holder is installed on the rear.
•
The Shovel can be installed anywhere on the front (tractor)
end of the PML. Usually, it is desirable to have it centered,
or as close to the center as possible, and the Mounting
Flange was designed with enough clearance for this
purpose.
4
Drip Tape Layer Kit Installation
Shovel mounted in center, directly behind
Mounting Flange.
Install the Drip Tape spool between the collars of
the Spool Holder. To prevent the Drip Tape from
unspooling, make sure the Spring is installed
outside of the collars. If the Drip Tape spool still
spins freely, compress the Spring further.
Spool Holder mounted with Drip Tape fed over the Mulch Roll and into the Shovel.
Shovel (left) and Spool Holder (right).
