6
|
SETTING UP THE APPLIANCE
1.
Remove all packaging. Inspect appliance to make sure it is in good condition.
2.
Rinse whisks and inside of jug with warm water and allow to dry.
3.
Wipe exterior of the jug with a damp cloth and allow to dry.
4.
Wipe base with a soft cloth.
5.
Reassemble and place on a stable, heat-resistant surface.
USAGE TIPS
•
For best results, only use whole milk (fat content > 3%).
•
Do not exceed the max capacity indicated on the inside of the jug.
•
Use milk immediately after heating or frothing.
•
Always keep lid on appliance during operation. Scalding may occur if lid is removed.
•
Cold frothing does not cool down the milk.
•
Allow at least 2 minutes between each use for thermostat to reset.
•
Do not put coffee or chocolate powder in the jug.
•
Do not operate without milk in the jug.
•
Do not operate on a polished wood surface as it could damage the wood.
CLEANING AND STORAGE
NOTE:
Do not immerse or soak the unit in water or any other liquid.
•
Unplug and let appliance cool before cleaning or storage.
•
Appliance is not dishwasher safe.
•
Rinse lid, silicon ring, whisks, and inside of jug with warm water. If necessary, use mild detergent and a
soft cloth.
•
Wipe exterior of the jug with a damp cloth.
•
Wipe base with a soft cloth.
•
Do not clean with steel wool, abrasive detergents, or corrosive liquids like gasoline or acetone.
•
Place unit and accessories in a cool, well-ventilated place to dry.
•
Store in a cool, dry place away from direct sunlight.
OPERATING INSTRUCTIONS
1.
Insert whisk into the bottom of the jug. Plug the base into a wall outlet.
2.
Pour milk into the jug and close the lid.
- Fill according to the max. and min. fill lines.
3.
Press the power button and the first setting (warm frothing with more foam) will be selected. Quick
press to select a different setting.
4.
The selected setting will start automatically.
- To select a different setting during operation: Press power button to turn off, then turn back on and
select a new setting.
5.
The milk frother will turn off after finishing. Pour out milk and unplug the base.
