5
1.
Introduction
This is an Administrator’s manual describing the wireless IP phone WLAN600 running in
Administrative mode. Before using WLAN600, some setup processes are required to make
the phone work properly. You should at least setup the IP address of WLAN600 and router
when DHCP is disabled. When DHCP server is available, you can skip the process of setting
up the WLAN600 IP address.
Figure 1.1 Network connections for WLAN600
Internet
Proxy Server
Proxy Server
AP
ADSL Modem
AP
ADSL Modem
WLAN600
WLAN600
6
2.
Getting Started
Please check the following before using the WLAN600:
Package contents
How to install and remove the battery
How to charge the battery
How to turn on/off the device
2.1.
Package Contents
You should find the following contents in your WLAN600 package:
WLAN600
Wireless
IP
Phone
x1
Standard battery
x1
Power charger
x1
WLAN600 Wireless IP Phone User’s Guide
x1
Power
Supply
(AC
adapter)
x1
Phone belt clip
x1
If any of these items are missing or damaged, please contact your distributor or sales
representative immediately.
2.2.
Installing and Removing the Battery
Step 1. With the phone display face down, push down on the grooves and slide the battery
cover off the telephone.
Figure 2.2-1 Removing the Back Panel
Step 2. With the battery label facing towards you; align the three metal contacts on the
battery with the three corresponding contacts on the telephone and press the battery
down into its place.
