BCM SL620, Руководство пользователя

Страница: 46 / 52

46
4. BIOS Setup
User
Define Set each mode individually. Select time-out periods in the PM Timers
section, following.
Min
Saving Minimum power savings. Inactivity period is 1 hour in each mode (except
the hard drive).
4.6.3 PM Control by APM
If Advanced Power Management (APM) is installed on your system, selecting Yes gives
better power savings.
4.6.4 Video Off Option
When enabled, this feature allows the VGA adapter to operate in a power saving mode.
Always On Monitor will remain on during power saving modes.
Suspend
à
Off Monitor blanked when the systems enter the Suspend mode.
Susp, Stby
à
Off Monitor blanked when the system enters either Suspend or Standby
modes.
All Modes
à
Off Monitor blanked when the system enters any power saving mode.
4.6.5 Video Off Method
Determines the manner in which the monitor is blanked.
V/H
SYNC+Blank System turns off vertical and horizontal synchronization ports and
writes blanks to the video buffer.
DPMS Support Select this option if your monitor supports the Display Power
Management Signaling (DPMS) standard of the Video Electronics
Standards Association (VESA). Use the software supplied for your
video subsystem to select video power management values.
Blank Screen System only writes blanks to the video buffer.
4.6.6 Switch Function
You can choose whether or not to permit your system to enter complete Suspend mode.
Suspend mode offers greater power savings, with a correspondingly longer awakening period.
The choice: Bread/Wake, Disabled.
4.6.7 Doze Speed (div by)
Defines the continuous idle time before the system entering DOZE mode. The range is from
1 minute t 1 hour. If any item defined is enabled & active, STANDBY timer will be