BCM IN810EP, Руководство пользователя, Страница: 53 / 57

53
4. BIOS SETUP 4. BIOS SETUP
System Hardware Monitor
AC Power Loss Control
The setting are power ON/OFF or Last status. During power ON, after every AC/Power
Loss, the system will be turned on. During last status, after every AC/Power Loss,
whatever the system status, it will be the same when AC power returns. During Off,
after every AC/Power Loss, the system will be shutdown.
Current CPU Temperature
The noboard hardware monitor is able to detect the CPU temperatures.
Current System Temperature
This field displays the current system temperature, if your computer contains a
monitoring system.
Current CPU Fan Speed
Current CPUFAN1 Speed these fields display the current speed of up to three CPU
fans, if your computer contains a monitoring system.
Current Fan1/Fan2 Speed
The onboard hareware monitor is able to detect the CPU fan speed in rotations pre
minute(PRM). The presence of the fans is automatically detected.
CPU VID
The onboard hardware are monitor is abled to detect the voltage output by the onboard
voltage regulators.
On Board FDC
Set this option to Enabled to enable the floppy drive controller on the motherboard.
On Board Serial PortA
This option specifies the base I/O port address of serial port A.
OnBoard Parallel Port
This option specifies the base I/O port address of the parallel port on the motherboard.