BCM IN810EP, Руководство пользователя, Страница: 24 / 57

24
3.INSTALLATION
(standby) mode in one of the following ways:
♦
Optional front panel sleep/resume button
♦
Prolonged system inactivity using the BIOS inactivity timer feature
(Section 4.5)
The 2-pin header supports a front panel sleep/resume switch, which must be a
momentary SPST type that is normally open
Power Switch (2-pin)
This connector supports the ATX case-mounted Power Switch, which in turn supports
System Suspend function. When the BIOS sets the Power Button function to “Delay 4
sec.”, the system can be set to the suspended mode once you push the power switch for
no longer then 4 seconds. If the power switch is pushed down for over 4 seconds the
system will be totally Power Off. When the BIOS setting sets the Delay 4 second to
“Instant-off”, then Power Switch function work as regular power switch.
Power LED (2-pin)
This header can be connected to a LED that will light when the computer is powered
on.
Speaker Connector (4-pin)
It is used to drive a chassis-mounted speaker if desired.